Air Conditioner Cost Calculator

A 3-ton central air conditioner drawing about 3,500 W for six hours a day costs roughly $3.82 a day — about $116 a month — at the U.S. average rate.

W

Average draw while running

h

Effective full-power hours

Sets the price per kWh

Estimated cost

$116.19/ month

$3.82 per day

$1,395.03 per year

Per hour
$0.64
kWh / month
638
Rate used
18.2¢
vs U.S. average
—

Estimate only. Air conditioner at 3500 W for 6 h/day, priced at your state’s average residential rate. Your utility and plan may differ — see methodology.

Why the compressor dominates the bill

An air conditioner has two power draws: the compressor, which moves refrigerant, and the fans, which move air. The compressor is roughly 90% of the total. That is why a unit’s cost tracks its tonnage and run time far more than its fan speed setting.

A "3-ton" system is a 36,000 BTU/h unit, and it typically draws 3,000–4,000 W while the compressor runs. In mild weather it cycles on and off, so average draw over an eight-hour afternoon can be half the peak. In a heat wave it runs nearly continuously, which is exactly when bills spike.

Cost by system size

SystemTypical drawkWh per dayMonthly cost
Window, 8,000 BTU800 W4.8≈ $26
Window, 10,000 BTU1,000 W6.0≈ $32
Central, 2-ton2,400 W14.4≈ $78
Central, 3-ton3,500 W21.0≈ $114
Central, 4-ton4,700 W28.2≈ $153
Six hours of cooling per day at the U.S. average rate.

The thermostat math

Cooling cost does not fall in a straight line with thermostat settings, but the direction is reliable: every degree above 72°F reduces run time by roughly 3–5%. Going from 70°F to 78°F for eight hours a day commonly cuts cooling cost by a quarter or more. Running the fan continuously instead of on auto adds a few dollars a month and can add humidity back into the house.

Window unit vs central: which costs more to run

Per hour, a window unit costs a fraction of a central system. Per room cooled, they converge. If you cool one bedroom at night, a window unit at 1 kW beats a 3.5 kW central system cooling an empty house. If you cool six rooms all day, central is usually the more efficient choice because one larger compressor is more efficient than six small ones.

What changes the number most

  • Outdoor temperature and humidity — run time, not wattage, is what moves the number.
  • House envelope: attic insulation and window shading can cut cooling load substantially.
  • SEER2 rating: a 14.3 SEER2 unit uses meaningfully more power than an 18 SEER2 unit for the same cooling output.
  • Time-of-use rates: shifting pre-cooling to off-peak hours can cut the effective price per kWh.

BTU, tons and square footage

One ton of cooling is 12,000 BTU per hour. A rough sizing rule is 20 BTU per square foot in a well-insulated home, more in a hot climate or an older house. That puts a 1,500-square-foot home at about 2.5 tons, and a 2,400-square-foot home at about 3.5–4 tons.

Oversizing is a real problem. A unit that is too large cools the air quickly, shuts off before it has removed much humidity, and cycles more often — which uses more energy and leaves the house feeling clammy. The correct size is the one that runs long, steady cycles.

Why the same unit costs different amounts in two houses

Run time is set by the house, not the equipment. Attic insulation, window shading, air sealing and duct leakage can move cooling cost by 30–40% between two identical systems. Before replacing an air conditioner because the bill is high, it is worth knowing whether the house is the actual problem.

Frequently asked questions

How many watts does a central AC use?

Roughly 1,000 W per ton while the compressor runs, so a 3-ton system draws about 3,000–3,500 W. Startup surge is higher but brief.

Is it cheaper to leave the AC on all day?

Usually not. A well-insulated house loses heat slowly, but continuous cooling still consumes more energy than cooling an empty house for eight hours. Setbacks of 5–8°F while away are the reliable saving.

How much does AC add to a summer bill?

In a hot state, cooling commonly accounts for a third to half of summer electricity use. On the numbers above, a 3-ton system at six hours a day adds about $114 a month at average rates.

Does a higher SEER rating really save money?

Yes, roughly in proportion. Moving from 14.3 to 18 SEER2 cuts compressor energy by about 20% for the same cooling, which on a $114 monthly cooling bill is around $23.

How many BTU do I need per square foot?

About 20 BTU per square foot as a starting point, adjusted up for hot climates, poor insulation and west-facing windows.

Does a bigger AC cool faster and cost less?

It cools faster but usually costs more overall: short cycles, worse humidity control and higher peak draw.

Keep going

The cost of one appliance rarely tells the whole story. These are the calculators people open next.