Methodology and data sources
Every number on MeterCost comes from one formula and one price series. This page documents both, so any result can be checked or reproduced.
The formula
kWh per day = (watts × hours per day) ÷ 1,000
cost per day = kWh per day × price per kWh
cost per month = cost per day × 30.4
cost per year = cost per day × 365
There is no efficiency correction, no hidden multiplier and no rounding between steps. Displayed values are rounded only at the final step.
Where the price per kWh comes from
Residential average retail prices by state come from the U.S. Energy Information Administration (EIA), Electric Power Monthly, Table 5.6.A. The dataset in this site is a reference snapshot; a scheduled job replaces it with the latest published values and updates the date shown below.
Current dataset status
August 2026 · last file update 2026-11-05
State averages hide real variation: a single utility can sit 20–30% above or below its state average, and time-of-use plans price the same kWh differently depending on the hour. That is why every calculator also accepts a rate typed directly from your bill — switch to “Use the rate from my bill” and enter your effective rate, which is the total amount due divided by the kWh used. It includes delivery, taxes and every fixed fee spread across your consumption, so it is the most accurate input available.
Where the wattage and hours come from
Appliance wattages are planning values drawn from public specifications and DOE/ENERGY STAR guidance. Every value in the appliance dataset carries its own source note. Hours per day are effective full-power hours: a refrigerator that cycles on and off is expressed as its average draw over 24 hours, not its peak.
This is the main source of error in any appliance estimate. A nameplate rating is a maximum, and actual use depends on weather, insulation, settings and age. Where a range is plausible, we publish the typical case and invite you to change the inputs.
What is excluded
- Fixed monthly charges, meter fees, taxes and other non-volumetric line items.
- Demand charges, which apply to some commercial and specialty residential rates.
- Standby consumption and efficiency loss as equipment ages.
- Installation, hardware and maintenance costs, which are one-time rather than energy costs.
Update policy
Rate data is refreshed monthly when the EIA series updates. Calculator pages show their last review date. When a formula or an assumption changes, the affected pages are re-reviewed and the date is updated — we do not silently change numbers.
Corrections
If a number here is wrong, we want to know. Write to contact@metercost.com with the page and the figure. Verified corrections are published with a dated note on the page.
Residential average price by state
Cents per kWh, highest first. U.S. average is shown at the bottom.
| State | ¢ / kWh |
|---|---|
| Hawaii | 47.2 |
| Maine | 32.1 |
| Massachusetts | 30.5 |
| California | 29.8 |
| Alaska | 29.4 |
| New York | 28.7 |
| Rhode Island | 28.2 |
| New Hampshire | 27.6 |
| District of Columbia | 26.0 |
| New Jersey | 24.6 |
| Connecticut | 24.5 |
| Vermont | 23.8 |
| Michigan | 23.0 |
| Pennsylvania | 21.8 |
| Maryland | 21.4 |
| Ohio | 19.4 |
| Wisconsin | 19.4 |
| Illinois | 19.3 |
| Delaware | 18.7 |
| Virginia | 17.6 |
| Colorado | 17.2 |
| Minnesota | 17.2 |
| Iowa | 17.1 |
| Indiana | 17.0 |
| New Mexico | 16.5 |
| Alabama | 16.3 |
| West Virginia | 16.3 |
| Missouri | 16.0 |
| Georgia | 15.9 |
| Oregon | 15.9 |
| Texas | 15.9 |
| South Carolina | 15.8 |
| Montana | 15.6 |
| Kansas | 15.5 |
| South Dakota | 15.2 |
| Arizona | 15.1 |
| Florida | 15.0 |
| North Carolina | 15.0 |
| Oklahoma | 14.8 |
| Washington | 14.6 |
| Arkansas | 14.4 |
| Mississippi | 14.4 |
| Wyoming | 14.4 |
| Kentucky | 13.8 |
| Nebraska | 13.5 |
| Idaho | 13.4 |
| Tennessee | 13.4 |
| North Dakota | 13.3 |
| Utah | 13.3 |
| Louisiana | 12.9 |
| Nevada | 12.7 |
| U.S. average | 18.2 |
Back to the calculators.