Induction Cooktop Cost Calculator
An induction burner drawing 1,800 W for 45 minutes costs about $0.25 a day — roughly $7 a month — and it usually beats a resistive cooktop because less heat escapes.
Average draw while running
Effective full-power hours
Sets the price per kWh
Estimated cost
$7.47/ month
$0.25 per day
$89.68 per year
- Per hour
- $0.33
- kWh / month
- 41
- Rate used
- 18.2¢
- vs U.S. average
- —
Estimate only. Induction cooktop at 1800 W for 0.75 h/day, priced at your state’s average residential rate. Your utility and plan may differ — see methodology.
Efficiency you can measure
Induction heats the pan directly by magnetic field; the glass stays cool. Roughly 85% of the energy reaches the food, versus 70–75% for a resistive coil and 40–50% for gas, most of which heats the kitchen air. Same cooking, less energy — and a cooler kitchen in summer, which also saves on air conditioning.
| Setup | Draw | Hours/day | Monthly |
|---|---|---|---|
| Single burner | 1,200 W | 0.75 | ≈ $5 |
| Typical burner | 1,800 W | 0.75 | ≈ $7 |
| Large burner | 2,500 W | 0.75 | ≈ $10 |
| Two burners | 3,000 W | 1.0 | ≈ $17 |
The catch is the cookware
Induction needs magnetic cookware. If a magnet sticks to the base, it works. Aluminium, copper and most glass do not, which means replacing pans is part of the real cost — often more than a year of electricity.
The ventilation saving nobody counts
Gas cooking requires a range hood running at high speed for the whole meal plus several minutes after. Induction produces almost no combustion byproducts, so the hood can run on low or not at all. That saves 50–150 W for an hour a day — comparable to the cooking energy itself.
Frequently asked questions
Is induction cheaper to run than electric coil?
Usually yes, by 10–20%, because more of the energy reaches the pan instead of the kitchen air.
Does induction work with any pan?
Only ferromagnetic cookware. Test with a magnet before buying.
Is induction cheaper than gas?
Depends on local gas prices, but induction avoids the indoor air-quality issues of combustion and is often cheaper per meal.
Does induction work with cast iron?
Yes, and cast iron holds heat well, though it responds more slowly than steel.
Can induction scratch?
The glass can scratch if pans are dragged. Lifting rather than sliding avoids it.
Keep going
The cost of one appliance rarely tells the whole story. These are the calculators people open next.