How to Read Your Electric Bill and Find the Line That Costs You Most
Four numbers on your bill decide everything else: kWh used, the supply rate, the fixed charges, and the period you are being billed for. Here is how to read each one.
By Yan Hausmann · 6 min read · Updated 2026-10-28
Electric bills are designed to be skimmed. The amount due is large; everything that explains it is small print. Once you know the four numbers that matter, most of the mystery disappears.
Number 1: kWh used
This is energy, not money. Your bill charges for kilowatt-hours, and everything else is a multiplier on that number. If kWh is flat month over month but the bill moved, the change came from a rate or a fee.
Number 2: the supply rate
In regulated states this is the utility’s tariff. In deregulated states (much of Texas, Pennsylvania, Ohio, Illinois and the Northeast) you may have a separate retail supplier, and the supply rate appears on its own line. A variable-rate plan can change month to month; a fixed plan cannot until renewal.
Number 3: delivery and fixed charges
Wires, meters, customer service and storm recovery are billed separately from the energy itself. Many bills include a flat customer charge plus a per-kWh delivery charge. These are the lines that make your "18¢ rate" actually cost 22¢ at the meter.
Number 4: the billing period and read type
Billing periods are not calendar months — they are usually 28 to 34 days, and a five-day-longer period at the same daily usage produces a bill that looks like a spike. Check whether the read was actual or estimated; estimated reads get trued up later.
Reading a time-of-use bill
On-peak, off-peak and super-off-peak periods are priced differently, sometimes by a factor of three. Your bill should show kWh broken out by period. If most of your usage lands on-peak, shifting laundry, dishwashing and EV charging to overnight is usually the single largest saving available without buying anything.
What not to worry about
- A "power factor" line on a residential bill is almost always informational, not a charge.
- Budget billing smooths payments; it does not change annual cost.
- A slightly higher bill in a 33-day month is arithmetic, not a rate hike.
Frequently asked questions
What is a good price per kWh?
Below the national residential average, which has recently run near 18¢/kWh. Under 12–13¢ is inexpensive; above 25¢ is expensive by U.S. standards.
Why are supply and delivery billed separately?
In deregulated markets the company that generates power is not the company that owns the wires. Splitting the bill keeps those charges transparent — and makes it easy to see when only one of them rises.
Does budget billing save money?
No. It averages your annual cost into equal monthly payments. It helps cash flow and hides seasonality, which is why spikes feel sudden when the plan is recalculated.
Put a number on it
Reading about costs is useful. Pricing your own appliance takes ten seconds.
Open the calculators