Time-of-Use Electricity Rates, Explained With Numbers

Time-of-use pricing charges different rates by hour. It is a good deal for households that can move load to the evening or overnight, and an expensive one for those who cannot.

By Yan Hausmann · 5 min read · Updated 2026-10-28

On a flat rate, every kWh costs the same. On a time-of-use plan, the afternoon and early evening — when demand peaks — can cost two to three times the overnight rate. The plan is not inherently better or worse; it is a bet on when you use power.

Typical structure

PeriodTypical hoursRelative price
Super off-peak12 a.m. – 6 a.m.0.4×
Off-peak9 a.m. – 4 p.m.0.8×
On-peak4 p.m. – 9 p.m.2.0–3.0×
Illustrative residential TOU periods.

Which loads to move

  • EV charging — the single biggest opportunity, often 10–15 kWh a night.
  • Laundry and dishwashing — easy to delay, several kWh per run.
  • Pool pump — a timer pays for itself in one season.
  • Water heating — a timer or heat pump water heater shifts load without noticing.

How to tell if it will save you money

Pull hourly usage from your utility’s portal for a month and multiply each hour by the plan’s rates. If more than about 25% of your consumption falls in the on-peak window and you cannot move it, the flat rate is usually cheaper. Households with an EV and no daytime load almost always win.

Frequently asked questions

Are time-of-use rates cheaper overall?

Only if you shift load. For a household that can move EV charging and laundry off-peak, yes. Otherwise a flat rate is usually better.

What hours are peak?

Most utilities peak between 4 p.m. and 9 p.m. on weekdays, when air conditioning and household demand overlap.

Can I switch back to a flat rate?

Usually at the next billing cycle or once per year, depending on the utility. Check the terms before enrolling.

Put a number on it

Reading about costs is useful. Pricing your own appliance takes ten seconds.

Open the calculators