Average Electricity Rates by State (and Why They Differ So Much)

The most expensive state pays roughly four times what the cheapest does. The gap is not weather — it is generation mix, transmission, regulation and scale.

By Yan Hausmann · 6 min read · Updated 2026-10-28

Residential electricity prices in the U.S. range from about 11¢ to over 40¢ per kWh. Two households using exactly the same number of kilowatt-hours can have bills that differ by hundreds of dollars a month purely because of where the meter is.

The extremes

State¢/kWhMain driver
Hawaii≈ 42¢Islanded grid, imported fuel
California≈ 29¢Wildfire costs, transmission, policy
Massachusetts≈ 28¢Imported gas, capacity costs
Connecticut≈ 28¢Congestion, older infrastructure
U.S. average≈ 18¢—
Texas≈ 14.5¢Deregulated retail, abundant gas and wind
Louisiana≈ 11.5¢Gas generation, industrial scale
Washington≈ 11.5¢Hydroelectric
Residential average price per kWh. Full table on the methodology page.

Four reasons the gap exists

  • Generation mix: hydro and wind are cheap to run; imported oil and islanded gas are not.
  • Transmission and distribution: long distances, congestion and storm recovery costs are passed through per kWh.
  • Regulation: vertically integrated utilities file rate cases; deregulated markets add retail margin and capacity auctions.
  • Scale and weather: a dense service territory with mild peaks spreads fixed costs over more kWh.

Why “the average” is a trap

A state average is a blend of every utility in the state. In states with many providers — Texas, Pennsylvania, Ohio — the spread within the state can be as wide as the spread between states. Your own effective rate, total bill divided by kWh, is the only number that should drive decisions.

Frequently asked questions

Which state has the cheapest electricity?

Louisiana, Washington and several Mountain states are consistently among the lowest, typically under 12¢/kWh residential.

Why is Hawaii so expensive?

Its grid is islanded and depends on imported fuel, so it cannot buy cheap power from neighbors or share reserve capacity.

Is my rate high for my state?

Compare your effective rate — total bill divided by kWh — with the state average. More than 15% above it is worth a call to your utility or supplier.

Put a number on it

Reading about costs is useful. Pricing your own appliance takes ten seconds.

Open the calculators